CAMBER-- Using a 2' carpenters level, attach two wooden blocks ,~1" thick, to contact the edge of the wheel rim and space the level away from the wheel center and tire bulge. Using drill bits you can gauge how far the top of the wheel is in from the bottom of the wheel caused by negative camber.

Front camber is -30' or .5 degrees (.5 tan X 17.25 = .151", 3.83mm or a #25 drill bit.)
Rear camber is -40' or .666 degrees (.666 tan X 17.25 = .199", 5.05mm or a #8 drill bit.)